LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2018 >> XTS Livery >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Engine Controls And Fuel - 3.6L (LFX LF3) - Repair Instructions >> Repair Instructions >> Fuel Tank Fuel Pump Module Replacement (NUB/NTB - FWD) >> Removal Procedure

Removal Procedure

  1. GM2817602Courtesy of GENERAL MOTORS COMPANY
    WARNING:

    Refer to Diesel/Gasoline Vapors Warning .

    Remove the fuel tank. Refer to Fuel Tank Replacement (FWD) .

  2. Disconnect the fuel pump electrical connector (1) and the quick connects (2). Refer to Plastic Collar Quick Connect Fitting Service .
  3. GM2205627Courtesy of GENERAL MOTORS COMPANY

    Use the CH 45722  wrench by turning counter clockwise and remove the lock ring (1).

  4. GM2817600Courtesy of GENERAL MOTORS COMPANY

    Disconnect the fuel pump vent hose from the fuel tank fuel pump module. Refer to Plastic Collar Quick Connect Fitting Service .

  5. GM2205628Courtesy of GENERAL MOTORS COMPANY

    Remove the fuel tank module (1) and the O-ring (2).