LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2018 >> XTS Livery >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Bolted Exterior Body Panels And Closures >> Repair Instructions >> Hood Primary Latch Release Cable Replacement >> Installation Procedure

Installation Procedure

  1. GM4784310

    Attach the mechanics wire to the new cable and guide the cable in.

  2. Connect the hood primary latch release cable grommet (1) to the plenum upper panel.
  3. GM4784309

    Connect the hood primary latch release cable (1) to the inside handle. Hood Primary Latch Release Cable Handle Replacement 

  4. GM4784307

    Attach the hood primary latch release cable to the retainers (2).

  5. Connect the cable end retainer (1) to the latch.
  6. GM4784305

    Air Inlet Grille Panel (1) - Install - Air Inlet Grille Panel Replacement

  7. GM4783149

    Front Compartment Side Sight Shield (2) - Install - Front Compartment Side Sight Shield Replacement 

  8. GM4783422

    Front Compartment Front Sight Shield (3) - Install - Front Compartment Front Sight Shield Replacement 

scientia non olet · About LEMON Manuals