4-5-6 Clutch Dam Installation

Fig 1: Identifying 4-5-6 Clutch Dam Components

Courtesy of GENERAL MOTORS COMPANY

4 - 5 - 6 Clutch Dam Installation

Callout	Component Name
1	4-5-6 Clutch Spring NOTE: Ensure the spring is installed in the correct orientation as shown.
2	4-5-6 Clutch Piston Fluid Dam NOTE: DT 47693-1 which is part of DT-47693 dam protector prevents the dam seal lip from damage during installation. Apply a thin coat of ATF to the I.D. of DT 47693-1 which is part of DT-47693 dam protector to ease the installation of the dam. Special Tools DT-47693 Dam Protector For equivalent regional tools, refer to Special Tools .
3	4-5-6 Clutch Dam Retaining Ring Special Tools DT 47693-2 Clutch Spring Compressor which is part of DT-47693 Dam Protector GE 8059 Snap Ring Pliers-Parallel Jaw or equivalent For equivalent regional tools, refer to Special Tools .

Callout

Component Name

4-5-6 Clutch Spring

NOTE:

Ensure the spring is installed in the correct orientation as shown.

4-5-6 Clutch Piston Fluid Dam

NOTE:

DT 47693-1 which is part of DT-47693 dam protector prevents the dam seal lip from damage during installation. Apply a thin coat of ATF to the I.D. of DT 47693-1 which is part of DT-47693 dam protector to ease the installation of the dam.

Special Tools
DT-47693 Dam Protector
For equivalent regional tools, refer to Special Tools .

4-5-6 Clutch Dam Retaining Ring

Special Tools

DT 47693-2 Clutch Spring Compressor which is part of DT-47693 Dam Protector
GE 8059 Snap Ring Pliers-Parallel Jaw or equivalent

For equivalent regional tools, refer to Special Tools .