Conditions for Running the DTC

DTC P0101, P0102, P0103, P0106, P0107, P0108, P0171, P0172, P0174, P0175, P0201, P0202, P0203, P0204, P0205, P0206, P0300, P0301, P0302, P0303, P0304, P0305, P0306, P0401, P042E, P0716, P0717, P0722, P0723, or P182E is not set.
Ignition voltage is greater than 8.5 V.
Engine speed is 400 - 7, 500 RPM for 5 s.
Throttle position signal is valid.
Engine torque signal is valid.
High side driver is enabled.
Output shaft speed is 36 RPM or greater, or the throttle position is 0.5 % or greater.
Transmission fluid temperature is -6.6°C (20°F) or greater.