Rear Closure Center with License Plate Applique Replacement

Callout	Component Name
Preliminary Procedure Open and support the rear liftgate. Liftgate Lower Trim Finish Panel Replacement
1	Rear Closure Center with License Plate Applique Bolt [4x] CAUTION: Refer to Fastener Caution . Tighten 4.7 N.m (42 lb in)
2	Rear Closure Center with License Plate Applique Bolt [2x] Tighten 4.7 N.m (42 lb in)
3	Rear Closure Center with License Plate Applique Retainer [2x] Procedure With a trim type release tool disengage the retainers on the rear closure center with license plate applique.
4	Rear Closure Center with License Plate Applique Procedure Disconnect all electrical connectors. Disengage the grommet from the liftgate outer panel.