LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2018 >> XT5 Platinum >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting System - Diagnostic Information And Procedures (DTC B3950 - C0297) >> Diagnostic Information and Procedures >> Hazard Lamps Malfunction >> Circuit/System Verification

Circuit/System Verification

  1. Ignition ON.
  2. Verify the scan tool Hazard Lamps Switch parameter changes between Active and Inactive while commanding the hazard lamps ON and OFF with the hazard warning switch.
    • If the parameter does not change 

      Refer to Circuit/System Testing.

    • Go to next step: If the parameter changes 
  3. Verify all left and right turn signal lamps turn ON and OFF while commanding the hazard lamps ON and OFF with the hazard warning switch.
    • Go to next step: If all turn signal lamps turn ON and OFF 
  4. All OK.
scientia non olet · About LEMON Manuals