Camshaft Housing Cover Insulator Replacement - Left Side

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Intake Manifold Replacement Remove the oil filler cap tube. Disconnect electrical connectors and remove the engine harness from the camshaft housing cover insulator.
1	Camshaft Housing Cover Insulator WARNING: The noise cancelling foam component MUST be replaced if it has been exposed to engine fluids. Failure to replace the noise cancelling foam component that has been exposed to engine fluids may result in an engine fire resulting in catastrophic engine damage, and possible injury or death.

Callout

Component Name

Preliminary Procedures

Intake Manifold Replacement
Remove the oil filler cap tube.
Disconnect electrical connectors and remove the engine harness from the camshaft housing cover insulator.

Camshaft Housing Cover Insulator

WARNING:

The noise cancelling foam component MUST be replaced if it has been exposed to engine fluids. Failure to replace the noise cancelling foam component that has been exposed to engine fluids may result in an engine fire resulting in catastrophic engine damage, and possible injury or death.