P45LR Seat Haptic Movement Motor - Driver Left Rear (UGN)

Courtesy of GENERAL MOTORS COMPANY

Connector Part Information

Terminal Part Information

Terminal Type ID	Terminated Lead	Diagnostic Test Probe	Terminal Removal Tool	Service Terminal	Tray Name	Core Crimp	Insulation Crimp
I	Not Required	J-35616-14 (GN)	No Tool Required	Not Required	Not Required	Not Required	Not Required
II	Not Required	J-35616-35 (VT)	No Tool Required	Not Required	Not Required	Not Required	Not Required
III	Not Required	J-35616-40 (BU)	No Tool Required	Not Required	Not Required	Not Required	Not Required

Pin	Size	Color	Circuit	Function	Terminal Type ID	Option
1	0.35	BU/GN	614	Memory Seat Switch Set Signal	I	-
2	0.35	BK/BU	5978	Memory Switch Low Reference	I	-
3	0.35	WH	615	Memory Seat Switch Signal 1	I	-
4	0.75	BN	2432	Driver Heated Back Element Control	I	-
5	0.5	OG/BU	3068	Driver Side Impact Module High Control	I	-
6	0.5	BK/OG	3069	Driver Side Impact Module Low Control	I	-
7	-	-	-	Not Occupied	-	-
8	0.75	BN/PU	2077	Driver Heated Seat Element Control	I	-
9	0.75	BN/BK	2078	Driver Heated Seat Element Low Reference	I	-
10	0.35	BK/YE	2080	Driver Heated Seat NTC Low Reference	I	-
11	0.35	YE/GY	2079	Driver Heated Seat NTC Signal	I	-
12	-	-	-	Not Occupied	-	-
13	0.35	BU	2425	Driver Heated Back NTC Signal	I	-
14 - 16	-	-	-	Not Occupied	-	-
17	1	RD/GN	5140	Battery Positive Voltage	II	-
18	0.75	PU/WH	639	Run/Crank Ignition 1 Voltage	II	-
19	0.35	GN/PU	5906	Driver Seat Vent Motor Control 1	I	-
20	2.5	RD/YE	5040	Battery Positive Voltage	III	-
21	2.5	BK	750	Ground	III	-
22 - 25	-	-	-	Not Occupied	-	-
26	0.5	OG/BN	238	Driver Seat Belt Switch Signal	I	-
27	0.5	BK/OG	1363	Driver Seat Belt Switch Low Reference	I	-
28 - 30	-	-	-	Not Occupied	-	-
31	0.5	OG/YE	3481	Driver Seat Belt Anchor Pretensioner High Control	I	-
32	0.5	PU/OG	3482	Driver Seat Belt Anchor Pretensioner Low Control	I	-
33	0.35	GN/WH	7530	Local Interconnect Network Serial Data Bus 8	I	-
34 - 35	-	-	-	Not Occupied	-	-
36	0.35	GN	5060	Low Speed GMLAN Serial Data	I	-