LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2018 >> XT5 Base, FWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat Hardware, Seat Trim, And Upholstery >> Repair Instructions >> Driver or Passenger Seat Removal and Installation

Driver or Passenger Seat Removal and Installation

GM4282881
Callout Component Name
WARNING:

Refer to SIR Warning .

Preliminary Procedures

  1. Disable the SIR system. SIR Disabling and Enabling .
  2. Disconnect the seat belt from the tensioner. Front Seat Belt Retractor Replacement
1 Front Seat Adjuster Finish Cover Bolt Cap [2x]
2 Driver or Passenger Seat Bolt [4x]
CAUTION:

Fastener Caution .


Tighten 
45 N.m (33 lb ft)
3 Driver or Passenger Seat

Procedure

  1. Disconnect the electrical connector.
  2. With the aid of an assistant, remove the front seat.
  3. Transfer components as necessary.
  4. Enable the SIR System. SIR Disabling and Enabling .
scientia non olet · About LEMON Manuals