Conditions for Setting the DTC

WARNING: This page is about a different variant/trim than selected.

C0396 03

Voltage on the sensor reference voltage 2 circuit, also known as the incremental encoder sensor (8 V) supply circuit, is 7.2 - 8.5 V, and voltage received by incremental encoder impulse signal circuit less than 0.35 V.

C0396 07

Voltage on the sensor reference voltage 2 circuit is 7.2 - 8.5 V, and voltage on incremental encoder impulse signal circuit greater than 4.6 V.

C0396 08

Incremental encoder impulse signal detected missing pulse during shifting.

C039E 03

Voltage on the sensor reference voltage 2 circuit is 1.5 - 9.0 V, and voltage received by incremental encoder direction signal circuit is less than 0.35 V.

C039E 07

Voltage on the sensor reference voltage 2 circuit is 1.5 - 9.0 V, and voltage on incremental encoder direction signal circuit is greater than 4.5 V.

P0652

Voltage on sensor reference voltage 2 circuit less than 7.2 V.

P0653

Voltage on sensor reference voltage 2 circuit greater than 8.5 V.