LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2018 >> Escalade ESV Platinum, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Engine Controls And Fuel - 6.0L (L96) - Repair Instructions) >> Repair Instructions >> Evaporative Emission System Hose/Pipe Replacement (Front Tank) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2018 Chevrolet Suburban 3500 HD. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Fuel Tank EVAP Lines
    GM1705659Courtesy of GENERAL MOTORS COMPANY
  1. Install the fuel/EVAP lines to the fuel tank.
    2. Fig 2: Fuel Tank Clips
    GM1705656Courtesy of GENERAL MOTORS COMPANY
  2. Connect the fuel/EVAP line quick connect fittings at the fuel tank module. Refer to Plastic Collar Quick Connect Fitting Service .
  3. Install the fuel/EVAP lines to the fuel tank clips (2-7) and close the clips.
  4. Install the fuel/EVAP line to the fuel tank clip (1).
    5. Fig 3: Fuel Tank Shield And Retainers
    GM1705654Courtesy of GENERAL MOTORS COMPANY
  5. Install the fuel tank shield (2) and retainers (1).
  6. Install the fuel tank. Refer to Fuel Tank Replacement (Front Tank) .
scientia non olet · About LEMON Manuals