LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2018 >> Escalade ESV Platinum, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Antilock Brake System) >> Repair Instructions >> Front Wheel Speed Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2018 Chevrolet Suburban 3500 HD. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Refer to Brake Dust Warning
  1. Remove Front Brake Rotor. Refer to Front Brake Rotor Replacement (JD9)Front Brake Rotor Replacement (J95)
  2. Disconnect Wheel Speed Sensor Electrical Connector
  3. Release Wheel Speed Sensor Harness Clip (1)
    Fig 1: Wheel Speed Sensor Harness Clips
    GM4138367Courtesy of GENERAL MOTORS COMPANY
  4. Release Wheel Speed Sensor Harness Clip (2)
  5. Release Wheel Speed Sensor Harness Clip (1)
    Fig 2: Wheel Speed Sensor Harness Clips
    GM4138368Courtesy of GENERAL MOTORS COMPANY
  6. Release Wheel Speed Sensor Harness Clip (2)
  7. Release Wheel Speed Sensor Harness Clip (1)
    Fig 3: Wheel Speed Sensor Harness Clip
    GM4138369Courtesy of GENERAL MOTORS COMPANY
  8. Remove Wheel Speed Sensor Bolt (1)
    Fig 4: Wheel Speed Sensor Bolt
    GM4138372Courtesy of GENERAL MOTORS COMPANY
  9. Remove Wheel Speed Sensor (1)
    Fig 5: Wheel Speed Sensor
    GM4138374Courtesy of GENERAL MOTORS COMPANY
scientia non olet · About LEMON Manuals