Installation Procedure

WARNING: This page is about a different car, the 2018 Chevrolet Suburban 3500 HD. However, it is still accessible from the selected car via links, so may be relevant.

Install Electronic Brake Control Module (1)

Fig 1: Electronic Brake Control Module
Courtesy of GENERAL MOTORS COMPANY
Install and tighten Electronic Brake Control Module Bolts (1) (Qty: 4) to 3 N.m (27 lb in)

Fig 2: Electronic Brake Control Module Bolts
Courtesy of GENERAL MOTORS COMPANY

CAUTION: Refer to Fastener Caution
Connect the EBCM electrical connector.
Program the EBCM. Refer to Control Module References