LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2018 >> Escalade ESV Platinum, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Antilock Brake System) >> Diagnostic Information And Procedures >> DTC C0710: Steering Position Signal >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2018 Chevrolet Suburban 3500 HD. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify that DTC U0077 or U0126 is not set.
    • Go to next step: If DTC U0077 or U0126 is not set 
  2. Verify the scan tool Steering Wheel Angle parameter value constantly changes from +550 to -550° as the steering wheel is turned through its entire range from left to right.
    • If the parameter does not constantly change with the steering wheel position or the reading is erratic 

      Refer to Circuit/System Testing below.

    • Go to next step: If the parameter constantly changes with the steering wheel position 
  3. All OK.
scientia non olet · About LEMON Manuals