LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2018 >> Escalade ESV Platinum, RWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 5.3L (L83) Or 6.2L (L86) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Valve Rocker Arm Cover Replacement - Right Side >> Installation Procedure

Installation Procedure

    Fig 1: Valve Rocker Arm Cover
    GM3271235Courtesy of GENERAL MOTORS COMPANY
  1. Install a NEW valve rocker arm gasket (2).
  2. Install the valve rocker arm cover (1).
  3. Fig 2: Valve Rocker Arm Cover Bolts
    GM3271174Courtesy of GENERAL MOTORS COMPANY
  4. Install valve rocker arm cover bolts (1) and hand tighten.
  5. Fig 3: Valve Rocker Arm Cover Bolts Tightening Sequence
    GM3271248Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

  6. Tighten the bolts in sequence to 10 N.m (89 lb in) as shown.
  7. Install the ignition coil. Refer to Ignition Coil Replacement .
  8. Position and attach the heater inlet and outlet hose bracket retainer.
  9. Install the air cleaner outlet duct. Refer to Air Cleaner Outlet Duct Replacement (Chevrolet and GMC)Air Cleaner Outlet Duct Replacement (Cadillac) .