LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2018 >> Escalade ESV Platinum, RWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 5.3L (L83) Or 6.2L (L86) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Vacuum Pump Belt Replacement >> Removal Procedure

Removal Procedure

  1. Remove Air Conditioning Compressor Belt - Air Conditioning Compressor Belt Replacement 
  2. Remove Steering Gear Skid Shield - Steering Gear Skid Shield Replacement
    3. Fig 1: Webbing, Crankshaft Pulley And Belt
    GM4605349Courtesy of GENERAL MOTORS COMPANY
  3. Insert the EN-51767-5  Webbing (1) between the pulley (2) and belt (3).
  4. While walking the EN-51767-5  Webbing around the circumference of the pulley, rotate the crankshaft pulley clockwise.
  5. Once the EN-51767-5  Webbing is around the circumference of the crankshaft pulley, pull the loose end of the EN-51767-5  Webbing inward toward the engine, removing the belt from the crankshaft pulley.
  6. Remove the belt from the vacuum pump pulley and then from the vehicle.
scientia non olet · About LEMON Manuals