LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2018 >> Escalade ESV Platinum, RWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine Mechanical - 5.3L (L83) Or 6.2L (L86) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Air Conditioning Compressor Belt Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Universal Stretchy Belt Installer
    GM4604055Courtesy of GENERAL MOTORS COMPANY
  1. Install EN-51767-1  Universal Stretchy Belt Installer (1) onto the balancer.
    2. Fig 2: Installing A/C Belt
    GM4604058Courtesy of GENERAL MOTORS COMPANY
  2. Position the belt (1) on the A/C pulley and the balancer as shown.
  3. Slide the belt installation tool downward, positioning the belt onto the A/C pulley, applying light tension to the belt.
  4. Slowly rotate the crankshaft and compressor pulleys in a counterclockwise direction until the belt (1) fully seats on both pulleys.
  5. Inspect the belt for proper installation and alignment.
  6. Rotate the balancer an additional 360 degrees to ensure proper belt installation.
  7. Install Steering Gear Skid Shield -Steering Gear Skid Shield Replacement
  8. Install Drive Belt - Drive Belt Replacement - Accessory 
scientia non olet · About LEMON Manuals