LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2018 >> Escalade ESV Platinum, RWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brake System >> Repair Instructions >> Rear Brake Hose Replacement (J95 To Rear Axle) >> Removal Procedure

Removal Procedure

WARNING:

Brake Dust Warning .

WARNING:

Brake Fluid Irritant Warning .

  1. Raise and support the vehicle. Lifting and Jacking the Vehicle
    2. Fig 1: Brake Pipe Fitting
    GM4144332Courtesy of GENERAL MOTORS COMPANY
  2. Disconnect Brake Pipe Fitting (1)
  3. Cap the brake pipe fitting to prevent brake fluid loss and contamination.
    4. Fig 2: Brake Pipe Fitting
    GM4144335Courtesy of GENERAL MOTORS COMPANY
  4. Disconnect Brake Pipe Fitting (1)
  5. Cap the brake pipe fitting to prevent brake fluid loss and contamination.
    6. Fig 3: Brake Hose Bracket Bolt
    GM4144337Courtesy of GENERAL MOTORS COMPANY
  6. Remove Brake Hose Bracket Bolt (1)
    7. Fig 4: Brake Pipe Fitting
    GM4144339Courtesy of GENERAL MOTORS COMPANY
  7. Disconnect Brake Pipe Fitting (1)
  8. Cap the brake pipe fitting to prevent brake fluid loss and contamination.
    9. Fig 5: Brake Pipe Fitting
    GM4144342Courtesy of GENERAL MOTORS COMPANY
  9. Disconnect Brake Pipe Fitting (1)
  10. Cap the brake pipe fitting to prevent brake fluid loss and contamination.
    11. Fig 6: Brake Hose Bracket Nut
    GM4144344Courtesy of GENERAL MOTORS COMPANY
  11. Remove Brake Hose Bracket Nut (1)
  12. Remove the brake hose.
scientia non olet · About LEMON Manuals