LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2018 >> Escalade ESV Platinum, RWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brake System >> Repair Instructions >> Front Brake Hose Replacement (J95) >> Removal Procedure

Removal Procedure

WARNING:

Refer to Brake Dust Warning .

WARNING:

Refer to Brake Fluid Irritant Warning .

  1. Raise and support the vehicle. Lifting and Jacking the Vehicle
  2. Remove the tire and wheel assembly. Tire and Wheel Removal and Installation (6-Lug Wheel)Tire and Wheel Removal and Installation (8-Lug Wheel)
    3. Fig 1: Brake Pipe Fitting
    GM4144316Courtesy of GENERAL MOTORS COMPANY
  3. Disconnect Brake Pipe Fitting (1)
    4. Fig 2: Brake Hose Bracket Bolt
    GM4144319Courtesy of GENERAL MOTORS COMPANY
  4. Remove Brake Hose Bracket Bolt (1)
    5. Fig 3: Brake Hose Bracket Bolt
    GM4144324Courtesy of GENERAL MOTORS COMPANY
  5. Remove Brake Hose Bracket Bolt (1)
    6. Fig 4: Brake Hose Fitting Bolt
    GM4144326Courtesy of GENERAL MOTORS COMPANY
  6. Remove Brake Hose Fitting Bolt (1)
    7. Fig 5: Brake Hose Fitting And Gaskets
    GM4144330Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Do not reuse the brake hose fitting gaskets.

  7. Remove Brake Hose Fitting Gasket (1) @ Brake Hose Fitting (2) and DISCARD
  8. Plug the caliper inlet to prevent brake fluid loss and contamination.
  9. Remove the brake hose.
scientia non olet · About LEMON Manuals