LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2018 >> Escalade ESV Platinum, RWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brake System >> Repair Instructions >> Brake Pedal Assembly Replacement (Without JF4) >> Removal Procedure

Removal Procedure

  1. Block the drive wheels.
    2. Fig 1: Brake Pedal Position Sensor Bolt
    GM3513857Courtesy of GENERAL MOTORS COMPANY
  2. Disconnect the brake pedal position sensor electrical connector.
  3. Remove the brake pedal position sensor bolt (1).
    4. Fig 2: Brake Pedal Position Sensor
    GM3513858Courtesy of GENERAL MOTORS COMPANY
  4. Remove the brake pedal position sensor (1).
    5. Fig 3: Power Brake Booster Pushrod Retaining Clip Bolt
    GM3513860Courtesy of GENERAL MOTORS COMPANY
  5. Remove the power brake booster pushrod retainer clip bolt (1).
    6. Fig 4: Power Brake Booster Pushrod Retaining Clip
    GM3513861Courtesy of GENERAL MOTORS COMPANY
  6. Remove the power brake booster pushrod retainer clip (1).
  7. Disconnect the power brake booster pushrod.
    8. Fig 5: Brake Pedal Pivot Nut
    GM3513862Courtesy of GENERAL MOTORS COMPANY
  8. Remove the brake pedal pivot nut (1).
    9. Fig 6: Brake Pedal Pivot Bolt
    GM3513863Courtesy of GENERAL MOTORS COMPANY
  9. Remove the brake pedal pivot bolt (1).
    10. Fig 7: Brake Pedal
    GM3513866Courtesy of GENERAL MOTORS COMPANY
  10. Remove the brake pedal (1).
scientia non olet · About LEMON Manuals