Instrument Panel Lower Trim Plate Applique Replacement (Cadillac)

Preliminary Procedure

1. Remove Instrument Panel Accessory Center Trim Plate. Refer to Instrument Panel Accessory Center Trim Plate Replacement (Cadillac) .
2. Remove Front Floor Console Applique - Left Side. Refer to Front Floor Console Applique Replacement - Left Side (Cadillac) .
3. Remove Front Floor Console Applique - Right Side. Refer to Front Floor Console Applique Replacement - Right Side (Cadillac) .

Procedure

1. Open the radio control compartment door.
2. Apply masking tape around the trim to prevent damage.
3. Use a flat bladed plastic trim tool in order to release the retainer clips securing the applique to the instrument carrier.
4. Disconnect electrical connections, if applicable.
5. Transfer components as necessary.