Video Display Replacement (Second Row)
| Callout | Component Name |
|---|---|
| Preliminary Procedure Remove the video auxiliary display cover. Refer to Video Auxiliary Display Cover Replacement . |
|
| 1 | Video Display Fasteners (Qty: 4)
CAUTION:
Refer to Fastener Caution .
NOTE:
Make sure that all 4 washers on the 4 mounting screws are accounted for. If any washers are off the screw and loose, discard to prevent a rattle. The washers were required only for assembly plant installation, and can be used if still on the screw or they can be discarded. Tighten 2 N.m (18 lb in) |
| 2 | Video Display Assembly Procedure Disconnect the electrical connector. |