LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2018 >> Escalade ESV Platinum, RWD >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lighting System - DTC B0655 To DTC B3951 >> Diagnostic Information And Procedures >> DTC B2625: Display Dimming Pulse Width Modulation Output Circuit >> Circuit/System Description

Circuit/System Description

The instrument panel dimmer switch is used to increase and decrease the brightness of the interior backlighting components. The instrument panel dimmer switch provides a voltage signal to the body control module (BCM) that will increase as the brightness of the lights are increased and decrease as the brightness of the lights are decreased. The BCM provides a low reference, signal, and B+ voltage reference to the instrument panel dimmer switch. When the instrument panel dimmer switch is placed in the desired position, the dimmed voltage setting is applied from the instrument panel dimmer switch through the instrument panel dimmer switch signal circuit to the BCM. The BCM interprets the signal and applies a pulse width modulated voltage through the LED dimming 1 and dimming 2 control circuits illuminating the interior backlighting to the requested level of brightness.

The indicators/backlighting for the components listed below are controlled by the Switch Indicator LED Backlight Dimming Control Terminal 5 X1.

scientia non olet · About LEMON Manuals