LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2018 >> Escalade Base, RWD >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Engine Controls And Fuel - 5.3L (L83) Or 6.2L (L86) - Repair Instructions >> Repair Instructions >> Evaporative Emission Canister Purge Tube Replacement >> Removal Procedure

Removal Procedure

NOTE:

Clean all fuel and evaporative emission (EVAP) line connections and surrounding areas prior to disconnecting the lines in order to avoid possible fuel and/or EVAP system contamination.

    Fig 1: EVAP Canister Purge Tube
    GM3267064Courtesy of GENERAL MOTORS COMPANY
  1. Disconnect the EVAP canister purge tube (1) from the EVAP canister solenoid. Refer to Plastic Collar Quick Connect Fitting Service .
    2. Fig 2: EVAP Canister Purge Tube
    GM3267082Courtesy of GENERAL MOTORS COMPANY
  2. Disconnect the EVAP canister purge tube (1) from the EVAP pipe. Refer to Plastic Collar Quick Connect Fitting Service .
  3. Remove the EVAP canister purge tube (1) from the vehicle.
scientia non olet · About LEMON Manuals