LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2018 >> Escalade Base, RWD >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Engine Controls And Fuel - 5.3L (L83) Or 6.2L (L86) - Repair Instructions >> Repair Instructions >> Evaporative Emission Canister Purge Tube Replacement >> Installation Procedure

Installation Procedure

    Fig 1: EVAP Canister Purge Tube
    GM3267082Courtesy of GENERAL MOTORS COMPANY
  1. Install the EVAP canister purge tube (1) to the vehicle.
  2. Connect the EVAP canister purge tube (1) to the EVAP pipe. Refer to Plastic Collar Quick Connect Fitting Service .
    3. Fig 2: EVAP Canister Purge Tube
    GM3267064Courtesy of GENERAL MOTORS COMPANY
  3. Connect the EVAP canister purge tube (1) to the EVAP canister solenoid. Refer to Plastic Collar Quick Connect Fitting Service .
scientia non olet · About LEMON Manuals