Front Seat Cushion Outer Finish Cover Replacement (22-Way Power)

Fig 1: Front Seat Cushion Outer Finish Cover (22-Way Power)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Front Seat Recliner Knob Replacement (22 Way Power) Front Seat Adjuster Knob Replacement (22-Way Rotary) Front Seat Adjuster Knob Replacement (22-Way Power) Disconnect the seat belt from the tensioner. Front Seat Belt Anchor Plate Tensioner Replacement
1	Front Seat Cushion Outer Finish Cover Front Screw CAUTION: Refer to Fastener Caution . Tighten 3 N.m (26 lb in)
2	Front Seat Cushion Outer Finish Cover Rear Screw Tighten 3 N.m (26 lb in) Procedure Disengage the seat back cushion finish panel straps and pull back the toe kick cover to gain access to the rear fastener.
3	Front Seat Cushion Outer Finish Cover CAUTION: Do not twist the cover during removal. Twisting the cover may cause the component to break. Procedure Remove the outer finish cover by pulling upward near the retainer clip locations. Disconnect all electrical connectors. Transfer components as necessary.