Fastener Specifications
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Rear Spring U-Bolt Washer |
Single Use Threaded Fastener/Component Tightening Specifications
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Rear Spring U-Bolt | Torque mating fastener |
| Rear Spring U-Bolt Nut | |
| First Pass: | 140 N.m (103 lb ft) |
| Final Pass: | 90 degrees |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Lower Control Arm Retaining Nut | |
| First Pass: | 100 N.m (74 lb ft) |
| Final Pass: | 95 degrees |
| Lower Shock Absorber Bolt | 115 N.m (85 lb ft) |
| Rear Lower Stabilizer Shaft Nut | |
| First Pass: | 65 N.m (48 lb ft) |
| Final Pass: | 40 degrees |
| Rear Spring Front Nut | |
| First Pass: | 170 N.m (125 lb ft) |
| Final Pass: | 45 - 51 degrees |
| Rear Spring Rear Nut | |
| First Pass: | 170 N.m (125 lb ft) |
| Final Pass: | 45 - 51 degrees |
| Rear Stabilizer Shaft Insulator Bolt | 32 N.m (24 lb ft) |
| Rear Suspension Lateral Link Bolt @ Axle | |
| First Pass: | 85 N.m (63 lb ft) |
| Final Pass: | 125 degrees |
| Rear Suspension Lateral Link Bolt @ Frame | |
| First Pass: | 85 N.m (63 lb ft) |
| Final Pass: | 125 degrees |
| Rear Suspension Trailing Arm Bolt | |
| First Pass: | 100 N.m (74 lb ft) |
| Final Pass: | 55 degrees |
| Rear Suspension Upper Trailing Arm Bolt | |
| First Pass: | 100 N.m (74 lb ft) |
| Final Pass: | 55 degrees |
| Rear Upper Stabilizer Shaft Link Nut | |
| First Pass: | 65 N.m (48 lb ft) |
| Final Pass: | 40 degrees |
| Shackle Nut | 103 N.m (76 lb ft) |
| Upper Shock Absorber Bolt | 115 N.m (85 lb ft) |
| Upper Shock Absorber Nut | 115 N.m (85 lb ft) |