Stabilizer Shaft Link Replacement (Light Duty)

Fig 1: View Of Stabilizer Shaft Link (1500)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (6-Lug Wheel)
1	Front Stabilizer Shaft Link Nut CAUTION: Refer to Fastener Caution . Procedure Remove all traces of the original adhesive patch. Tighten 23 N.m (17 lb ft)
2	Front Stabilizer Shaft Link Bolt Procedure Remove all traces of the original adhesive patch. Apply thread locking adhesive to the bolt. Refer to Adhesives, Fluids, Lubricants and Sealers
3	Front Stabilizer Shaft Link Washer [2x]
4	Front Stabilizer Shaft Link Insulator [4x]
5	Front Stabilizer Shaft Link Spacer