Stabilizer Shaft Insulator Replacement (Heavy Duty)

Fig 1: Stabilizer Shaft Insulator (Heavy Duty)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure  Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle
1	Front Stabilizer Shaft Clamp Bolt [2x] CAUTION: Refer to Fastener Caution . Tighten  50 N.m (37 lb ft)
2	Front Stabilizer Shaft Clamp
3	Front Stabilizer Shaft Insulator NOTE: Ensure the slit in the front stabilizer shaft insulator is facing toward the front of the vehicle when installed.