Removal Procedure
WARNING: This page is about a different car, the 2018 Chevrolet Suburban 3500 HD. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT:
Clean all fuel and evaporative emission (EVAP) line connections and surrounding areas prior to disconnecting the lines in order to avoid possible fuel and/or EVAP system contamination.
- Remove the intermediate fuel and evaporative emission (EVAP) lines. Refer to Evaporative Emission System Hose/Pipe Replacement (Front Tank) Evaporative Emission System Hose/Pipe Replacement (Intermediate) .
- Gently pry straight up, in order to remove the fuel pressure sensor.