Fuel Tank Filler Pipe Replacement: Assemble
WARNING: This page is about a different car, the 2018 Chevrolet Suburban 3500 HD. However, it is still accessible from the selected car via links, so may be relevant.
- Fuel tank fill hose clamp (12)
Tighten
Tighten the clamp to 4 N.m (35 lb in).
- Fuel tank fill pipe (11)
- Evaporative emission canister hose clip (10)
- Fuel tank fill hose clamp (9)
Tighten
Tighten the clamp to 4 N.m (35 lb in).
- Fuel tank vent hose (8)
- Fuel tank fill pipe clamp (7)
Tighten
Tighten the clamp to 4 N.m (35 lb in).
- Fuel tank fill pipe restrictor (6)
- Fuel tank fill pipe housing (5)
- Fuel tank fill pipe housing bolts (4)
Tighten
Tighten the bolts to 2.3 N.m (20 lb in).
- Fuel tank fill pipe clamp (3)
Tighten
Tighten the clamp to 4 N.m (35 lb in).
- Evaporative emission canister hose clamp (2)
Tighten
Tighten the clamp to 2.5 N.m (22 lb in).
- Evaporative emission canister hose (1)
CAUTION:
Refer to Fastener Caution .