LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2018 >> Escalade Base, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Engine Controls And Fuel - 6.0L (L96) - Repair Instructions) >> Repair Instructions >> Fuel Level Sensor Replacement (Rear Tank) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2018 Chevrolet Suburban 3500 HD. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Fuel Level Sensor, Electrical Connector And Retaining Clip (Rear Tank)
    GM1705922Courtesy of GENERAL MOTORS COMPANY
  1. Remove the fuel tank module. Refer to Fuel Tank Fuel Pump Module Replacement (Rear Tank) .
  2. Disconnect the fuel level sensor electrical connector (3) from under the module cover.
  3. Release the level sensor retaining clip (1).
  4. Slide the fuel level sensor (2) down off the bucket.
scientia non olet · About LEMON Manuals