LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2018 >> Escalade Base, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Engine Controls And Fuel - 6.0L (L96) - Repair Instructions) >> Repair Instructions >> Fuel Level Sensor Replacement (Front Tank) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2018 Chevrolet Suburban 3500 HD. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Fuel Level Sensor Electrical Connector (Front Tank)
    GM1705918Courtesy of GENERAL MOTORS COMPANY
  1. Remove the fuel tank module. Refer to Fuel Tank Fuel Pump Module Replacement (Front Tank) .
  2. Disconnect the fuel level sensor electrical connector (1) from under the module cover.
    3. Fig 2: Fuel Level Sensor Retaining Clip
    GM1705920Courtesy of GENERAL MOTORS COMPANY
  3. Release the fuel level sensor retaining clip (1).
  4. Slide the fuel level sensor down off of the bucket.
scientia non olet · About LEMON Manuals