LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2018 >> Escalade Base, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Engine Controls And Fuel - 6.0L (L96) - Repair Instructions) >> Repair Instructions >> Evaporative Emission Canister Purge Tube Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2018 Chevrolet Suburban 3500 HD. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: EVAP Canister Purge Tube
    GM3910829Courtesy of GENERAL MOTORS COMPANY
  1. Install the EVAP canister purge tube (1) to the vehicle.
  2. Connect the EVAP canister purge tube (1) to the EVAP pipe. Refer to Plastic Collar Quick Connect Fitting Service .
    3. Fig 2: EVAP Canister Purge Tube
    GM3910798Courtesy of GENERAL MOTORS COMPANY
  3. Connect the EVAP canister purge tube (1) to the EVAP canister solenoid. Refer to Plastic Collar Quick Connect Fitting Service .
  4. Install the intake manifold sight shield. Refer to Upper Intake Manifold Sight Shield Replacement .
scientia non olet · About LEMON Manuals