LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2018 >> Escalade Base, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Engine Controls And Fuel - 6.0L (L96) - Repair Instructions) >> Repair Instructions >> Engine Control Module Bracket Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2018 Chevrolet Suburban 3500 HD. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove Engine Control Module. Refer to Engine Control Module Replacement 
  2. Remove Auxiliary Battery. Refer to Auxiliary Battery Replacement (9C1)
  3. Remove the left front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement - Left Side (Chevrolet)
    4. Fig 1: Engine Control Module Bracket Bolt
    GM5035211Courtesy of GENERAL MOTORS COMPANY
  4. Remove Engine Control Module Bracket Bolt (1)
    5. Fig 2: Battery Tray Bolts And Engine Control Module Bracket
    GM5035215Courtesy of GENERAL MOTORS COMPANY
  5. Remove Battery Tray Bolts (1) (Qty: 2)
  6. Remove Engine Control Module Bracket (2)
scientia non olet · About LEMON Manuals