LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2018 >> Escalade Base, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Engine Controls And Fuel - 6.0L (L96) - DTC P0010 To DTC P0341) >> Diagnostic Information And Procedures >> DTC P0335 Or P0336: Crankshaft Position Sensor >> Conditions for Setting the DTC

Conditions for Setting the DTC

WARNING: This page is about a different car, the 2018 Chevrolet Suburban 3500 HD. However, it is still accessible from the selected car via links, so may be relevant.

P0335 Condition 1 

Crankshaft Position Sensor = No Signal - For greater than 4 s

Condition 2 

Crankshaft Position Sensor = No Signal - For greater than 1 s

Condition 3 

Crankshaft Position Sensor = No Signal - During 2 engine revolutions.

P0336 Condition 1 

Crankshaft Position Sensor = Signal synchronization lost 10 times within 10 s.

Condition 2 

Crankshaft Position Sensor = Sync gap not detected. - For greater than 1 s

Condition 3 

Crankshaft Position Sensor = Sync gap not detected. - Since last starter engagement. - For greater than 2 s

Condition 4 

Crankshaft Position Sensor = Not between 51 and 65 pulses - During 1 engine revolutions. - For 8 out of 10 engine revolutions