Conditions for Running the DTC
WARNING: This page is about a different car, the 2018 Chevrolet Suburban 3500 HD. However, it is still accessible from the selected car via links, so may be relevant.
P0335 Condition 1
- DTC P0101, P0102, P0103 = Not set
- Camshaft Position Sensor = Signal received
- MAF Sensor = Greater than 3 g/s
Condition 2
- Engine = Running
- Starter = Inactive
Condition 3
- DTC P0340, P0341 = Not set
- Engine = Running
Frequency the DTC runs = Continuously - After the running conditions are met
P0336 Condition 1
- DTC P0335, P0651 = Not set
- MAF Sensor = Greater than 3 g/s
- Engine Speed = Greater than 450 RPM
Condition 2
- Engine = Running
- Starter = Inactive
Condition 3
- DTC P0101, P0102, P0103 = Not set
- Camshaft Position Sensor = Signal received
- MAF Sensor = Greater than 3 g/s
- Starter = Active
Condition 4
- DTC P0340, P0341 = Not set
- Engine = Running
Frequency the DTC runs = Continuously - After the running conditions are met