Circuit/System Description

WARNING: This page is about a different car, the 2018 Chevrolet Suburban 3500 HD. However, it is still accessible from the selected car via links, so may be relevant.

The engine control module (ECM) controls the air/fuel metering system in order to provide the best possible combination of driveability, fuel economy, and emission control. The ECM monitors the heated oxygen sensor (HO2S) signal voltage and adjusts the fuel delivery based on the signal voltage while in Closed Loop. A change made to the fuel delivery changes the long and short term fuel trim (FT) values. The short term FT values change rapidly in response to the HO2S voltage signals. These changes fine tune the engine fueling. The long term FT makes coarse adjustments in order to maintain an optimum air/fuel ratio. The ideal FT values are around zero percent. A positive FT value indicates that the ECM is adding fuel in order to compensate for a lean condition. A negative FT value indicates that the ECM is reducing the amount of fuel in order to compensate for a rich condition.