LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2018 >> Escalade Base, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Automatic Transmission - 8L90 (M5U) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Transmission Fluid Baffle Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2018 Chevrolet Suburban 3500 HD. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Transmission Fluid Baffle And Bolts
    GM3816731Courtesy of GENERAL MOTORS COMPANY
  1. Install the transmission fluid pump baffle (2).
  2. Install the NEW transmission fluid baffle bolts (1) and tighten to 4 N.m (35 lb in) plus 45 degrees.
    3. Fig 2: Transmission Fluid Pan, Filter, Filter Seal, Gasket And Bolts (With Tightening Sequence)
    GM3794350Courtesy of GENERAL MOTORS COMPANY
  3. Install the transmission fluid filter (4). Refer to Automatic Transmission Fluid, Fluid Pan and/or Filter Replacement .
scientia non olet · About LEMON Manuals