Range Selector Lever Cable Bracket Replacement

WARNING: This page is about a different car, the 2018 Chevrolet Suburban 3500 HD. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Range Selector Lever Cable Bracket

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Apply the park brake. Shift the transmission into neutral. Raise the vehicle. Refer to Lifting and Jacking the Vehicle . Remove the transmission range selector cable from the range selector cable bracket. Refer to Range Selector Lever Cable Replacement . If equipped with 4WD, remove the front axle propeller shaft. Refer to Front Axle Propeller Shaft Replacement (NQH)Front Axle Propeller Shaft Replacement (Heavy Duty) .
1	Transmission Range Selector Cable Bracket Bolt (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 22 N.m (16 lb ft)
2	Transmission Range Selector Cable Bracket

Callout

Component Name

Preliminary Procedures

Apply the park brake.
Shift the transmission into neutral.
Raise the vehicle. Refer to Lifting and Jacking the Vehicle .
Remove the transmission range selector cable from the range selector cable bracket. Refer to Range Selector Lever Cable Replacement .
If equipped with 4WD, remove the front axle propeller shaft. Refer to Front Axle Propeller Shaft Replacement (NQH)Front Axle Propeller Shaft Replacement (Heavy Duty) .

Transmission Range Selector Cable Bracket Bolt (Qty: 2)

CAUTION:

Refer to Fastener Caution .

Tighten
22 N.m (16 lb ft)

Transmission Range Selector Cable Bracket