Propeller Shaft Front Slip Yoke Oil Seal Replacement (Two Wheel Drive)

WARNING: This page is about a different car, the 2018 GMC Yukon XL, 2018 GMC Yukon, 2018 Chevrolet Tahoe, 2018 Chevrolet Suburban 3500 HD, and 2018 Chevrolet Suburban. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Propeller Shaft Front Slip Yoke Oil Seal (2WD)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle . Remove the propeller shaft. Refer to Rear Propeller Shaft Replacement (1500)Rear Propeller Shaft Replacement (Heavy Duty)Rear Propeller Shaft Replacement (M5U, 2WD) .
1	Propeller Shaft Front Slip Yoke Oil Seal Special Tools DT-48021 Seal Installer (6L90) GE-8092 Driver Handle (6L90) J-38869 Output Shaft Seal Installer (6L80) J-45000 Seal Remover For equivalent regional tools, refer to Special Tools .

Callout

Component Name

Preliminary Procedures

Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
Remove the propeller shaft. Refer to Rear Propeller Shaft Replacement (1500)Rear Propeller Shaft Replacement (Heavy Duty)Rear Propeller Shaft Replacement (M5U, 2WD) .

Propeller Shaft Front Slip Yoke Oil Seal

Special Tools

DT-48021 Seal Installer (6L90)
GE-8092 Driver Handle (6L90)
J-38869 Output Shaft Seal Installer (6L80)
J-45000 Seal Remover

For equivalent regional tools, refer to Special Tools .