LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2018 >> Escalade Base, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Automatic Transmission - 6L80 (MYC) Or 6L90 (MYD) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Manual Shift Detent Lever And Park Pawl Actuator Replacement

Manual Shift Detent Lever And Park Pawl Actuator Replacement

WARNING: This page is about a different car, the 2018 GMC Yukon XL, 2018 GMC Yukon, 2018 Chevrolet Tahoe, 2018 Chevrolet Suburban 3500 HD, and 2018 Chevrolet Suburban. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Manual Shift Detent Lever And Park Pawl Actuator
GM2699066Courtesy of GENERAL MOTORS COMPANY
Callout Component Name

Preliminary Procedures

  1. Remove the automatic transmission range select lever. Refer to Automatic Transmission Range Selector Lever Replacement .
  2. Remove the valve body. Refer to Control Valve Lower Body and Upper Body Replacement .
1 Manual Shaft Detent Lever Hub Pin
NOTE:
  • Discard the pin. Replace with NEW pin.
  • "Walk" the pin out using side cutters.
2 Manual Shift Shaft Pin
NOTE:
  • Discard the pin. Replace with NEW pin.
  • "Walk" the pin out using side cutters.
3 Manual Shift Shaft
4 Manual Shaft Detent Lever Assembly
5 Park Pawl Actuator Assembly
scientia non olet · About LEMON Manuals