LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2018 >> Escalade Base, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Automatic Transmission - 6L80 (MYC) Or 6L90 (MYD) - Repair Instructions - On Vehicle) >> Repair Instructions - On Vehicle >> Automatic Transmission Fluid Pressure Test Hole Plug Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2018 GMC Yukon XL, 2018 GMC Yukon, 2018 Chevrolet Tahoe, 2018 Chevrolet Suburban 3500 HD, and 2018 Chevrolet Suburban. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Oil Pressure Test Plug
    GM1649737Courtesy of GENERAL MOTORS COMPANY
  1. Install the oil pressure test plug and tighten to 11 N.m (97 lb in).
  2. Check the transmission fluid level (fill if necessary). Refer to Transmission Fluid Level and Condition Check .
  3. Lower the vehicle.