Automatic Transmission Fluid Pump Assembly Removal
WARNING: This page is about a different car, the 2018 Chevrolet Suburban 3500 HD. However, it is still accessible from the selected car via links, so may be relevant.
Automatic Transmission Fluid Pump Assembly Removal
| Callout | Component Name |
|---|---|
| 1 | Automatic Transmission Fluid Pump Bolt M6 x 28 (Qty: 5) |
| 2 | Automatic Transmission Fluid Pump |
| 3 | Automatic Transmission Fluid Pump Seal
NOTE:
Discard the seal, it is not reusable. |
| 4 | Automatic Transmission Fluid Pump Gasket
NOTE:
Discard the gasket, it is not reusable. |
| 5 | Automatic Transmission Fluid Pump Drive Shaft Bushing |
| 6 | Automatic Transmission Fluid Pump Passage Sleeve |
| 7 | Automatic Transmission Fluid Pump Locating Pin (Qty: 2)
NOTE:
Only remove the locator pins if they need to be replaced. |