4-5-6-7-8 Reverse Clutch Piston Removal

WARNING: This page is about a different car, the 2018 Chevrolet Suburban 3500 HD. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: 4-5-6-7-8 Reverse Clutch Piston

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	4-5-6-7-8-Reverse Clutch Piston Dam Retaining Ring Procedure DISCARD the retaining ring. Special Tools DT-35512 Bearing Installer DT-50900 Clutch Travel Support Fixture DT-50902 Adjustable Clutch Spring Compressor Equivalent regional tools: Special Tools
2	4-5-6-7-8-Reverse Clutch Piston Dam Procedure Use the DT-50905 clutch air travel adapter with compressed air to remove the piston and piston dam as an assembly. Special Tool DT-50905 Clutch Air Travel Adapter Equivalent regional tools: Special Tools
3	4-5-6-7-8-Reverse Clutch Piston Seal CAUTION: Refer to Seal Reuse Caution . Procedure DISCARD the seal.
4	4-5-6-7-8-Reverse Clutch Piston Return Spring NOTE: Observe the orientation of the spring for assembly.
5	4-5-6-7-8-Reverse Clutch Piston
6	4-5-6-7-8-Reverse Clutch Piston Stop NOTE: Observe the orientation of the stop for assembly
7	4-5-6-7-8-Reverse Clutch Piston Seal CAUTION: Refer to Seal Reuse Caution . Procedure DISCARD the seal.