4-5-6-7-8 Reverse Clutch Plates Installation
WARNING: This page is about a different car, the 2018 Chevrolet Suburban 3500 HD. However, it is still accessible from the selected car via links, so may be relevant.
4-5-6-7-8 Reverse Clutch Plates Installation
| Callout | Component Name |
|---|---|
| 1 | 4-5-6-7-8-Reverse Clutch Plate - Waved Procedure
NOTE:
The teeth on the clutch plate goes between notches on the piston. Align center tooth with notch on piston. |
| 2 | 4-5-6-7-8-Reverse Clutch Plate (Qty: 4) |
| 3 | 4-5-6-7-8-Reverse Clutch Plate - Friction (Qty: 4) |
| 4 | 4-5-6-7-8-Reverse Clutch Backing Plate |
| 5 | 4-5-6-7-8-Reverse Clutch Backing Plate Retaining Ring Procedure
NOTE:
The retaining ring opening should be between the teeth on the clutch plates. Select the correct retaining ring. Refer to 4-5-6-7-8 Reverse Clutch Backing Plate Retaining Ring Measurement |