4-5-6-7-8 Reverse Clutch Piston Installation

WARNING: This page is about a different car, the 2018 Chevrolet Suburban 3500 HD. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: 4-5-6-7-8 Reverse Clutch Piston

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
CAUTION: Refer to Seal Reuse Caution .
1	4-5-6-7-8-Reverse Clutch Piston Seal Procedure Install a NEW seal. Do NOT reuse the old seal.
2	4-5-6-7-8-Reverse Clutch Piston Stop Procedure Position the stop in the orientation observed during removal.
3	4-5-6-7-8-Reverse Clutch Piston
4	4-5-6-7-8-Reverse Clutch Piston Return Spring Procedure Position the spring in the orientation observed during removal.
5	4-5-6-7-8 Reverse Clutch Piston Dam Seal Procedure Install a NEW seal. Do NOT reuse the old seal.
6	4-5-6-7-8-Reverse Clutch Piston Dam
7	4-5-6-7-8-Reverse Clutch Piston Dam Retaining Ring Procedure NOTE: The points on the retaining ring should face up. It may be helpful to loosely install the retaining ring before installing the tool. Install a NEW retaining ring. Special Tools DT-35512 Bearing Installer DT-50900 Clutch Travel Support Fixture DT-50902 Adjustable Clutch Spring Compressor Equivalent regional tools: Special Tools