2-3-4-6-8 Clutch Piston Installation

WARNING: This page is about a different car, the 2018 Chevrolet Suburban 3500 HD. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: 2-3-4-6-8 Clutch Piston

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
CAUTION: Refer to Seal Reuse Caution .
1	2-3-4-6-8 Clutch Piston Seal Procedure Install a NEW seal. Do NOT reuse the old seal.
2	2-3-4-6-8 Clutch Piston
3	2-3-4-6-8 Clutch Piston Return Spring Procedure Position the spring in the orientation as observed during removal.
4	2-3-4-6-8 Clutch Piston Dam Seal - Inner Procedure Install a NEW seal. Do NOT reuse the old seal.
5	2-3-4-6-8 Clutch Piston Dam Seal - Outer Procedure Install a NEW seal. Do NOT reuse the old seal.
6	2-3-4-6-8 Clutch Piston Dam
7	2-3-4-6-8 Clutch Piston Dam Retaining Ring Procedure NOTE: It may be helpful to loosely install the retaining ring before installing the tool. Install a NEW retaining ring. Special Tools DT-35512 Bearing Installer DT-50900 Clutch Travel Support Fixture DT-50902 Adjustable Clutch Spring Compressor Equivalent regional tools: Special Tools