Torque Converter Housing With Fluid Pump Installation
WARNING: This page is about a different car, the 2018 GMC Yukon XL, 2018 GMC Yukon, 2018 Chevrolet Tahoe, 2018 Chevrolet Suburban 3500 HD, and 2018 Chevrolet Suburban. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| 1 | Automatic Transmission Fluid Pump Seal
NOTE:
Install a NEW seal. Do NOT reuse the old seal.
|
| 2 | Torque Converter with Fluid Pump Housing Assembly
CAUTION:
Ensure the turbine shaft (O-ring) seal is not installed prior to installing the torque converter housing assembly. The seal may become cut or damaged during installation of the torque converter housing assembly.
|
| 3 | Torque Converter Housing Bolt (Qty: 9)
CAUTION:
Refer to Fastener Caution
. Tighten in sequence 72 N.m (53 lb ft) |
| 4 | Turbine Shaft Seal
NOTE:
Install a NEW seal. Do NOT reuse the old seal.
|