Torque Converter Housing With Fluid Pump Assemble
WARNING: This page is about a different car, the 2018 GMC Yukon XL, 2018 GMC Yukon, 2018 Chevrolet Tahoe, 2018 Chevrolet Suburban 3500 HD, and 2018 Chevrolet Suburban. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
| 1 | Automatic Transmission Fluid Pump Slide Fluid Seal Ring |
| 2 | Automatic Transmission Fluid Pump Slide Seal |
| 3 | Automatic Transmission Fluid Pump Slide Pivot Pin |
| 4 | Automatic Transmission Fluid Pump Slide Seal Support
NOTE:
The seal support is circular. The seal is rectangular.
|
| 5 | Automatic Transmission Fluid Pump Slide Seal |
| 6 | Automatic Transmission Fluid Pump Slide Procedure If installing a NEW pump slide into the torque converter housing, ensure to properly select the correct rotor and slide before performing this procedure. Refer to Fluid Pump Selective Measurement and Fluid Pump Selective Specifications |
| 7 | Automatic Transmission Fluid Pump Slide Outer Spring |
| 8 | Automatic Transmission Fluid Pump Vane Ring |
| 9 | Automatic Transmission Fluid Pump Rotor Guide
CAUTION:
Align the rotor guide tabs to the notches on the bottom of the rotor. Failure to do so may cause transmission damage.
|
| 10 | Automatic Transmission Fluid Pump Rotor Procedure If installing a NEW pump rotor into the torque converter housing, ensure to properly select the correct rotor and slide before performing this procedure. Refer to Fluid Pump Selective Measurement and Fluid Pump Selective Specifications |
| 11 | Automatic Transmission Fluid Pump Vane (Qty: 13) |
| 12 | Automatic Transmission Fluid Pump Vane Ring |